top of page

The Pool'N Brush is pretty effective aftermarket Sweep Hose tail scrubbing brush that attaches to the Sweep Hose of your Polaris or Pentair Pressure Cleaner. The Pool”N Brush is designed to scrub your pool surface as the Sweep Hose moves along the pool bottom. Unlike the black foam Tail Scrubber that comes with the cleaner, the Pool'N Brush his made out of hard plastic and has hard bristle brushes on the bottom. It is designed to last 20 times longer than the OEM replacement foam tail scrubbers.

 

It has a cone shape and the brushes are set in a way that it will so that it will make contact with the pool surface and these brushes are designed to be very long lasting. The weight of the Pool'N Brush ensures that the tail will not come out of the water and spray your pool deck and windows. Unlike the foam scrubber, it actually will scrub your pool surface allowing the Sweep Hose not only to loosen debris but clean the pool surface.

 

The Pool'N Brush is easy to install. It will snap right onto your existing Polaris or Pentair Legend Sweep Hose where the foam scrubber sits. If the end is worn out a new orifice tip and guard are also included with the Pool'N Brush. Remove the old orifice tip with a pair of Channel Locks and slide the included one into the Sweep Hose. Then simply snap the Pool'N Brush onto the end and listen for it to clip in and you are all done. You can also remove or move of the wear rings on the Sweep Hose to give the tail some more sweeping motion. You can also increase the Sweep Hose water pressure by loosening the Allen Screw on the cleaner body right where the Sweep Hose attaches in the back. By turning the screw counter-clockwise you will increase water flow to the tail.

 

The Pool'N Brush fits these model cleaners:

 

Polaris 180

Polaris 280

Polaris 360

Polaris 380

Polaris 3900 Sport

Polaris TR35P

Polaris TR36P

 

Pentair LL505G Kreepy Krauly Legend

Pentair LX5000 Kreepy Krauly Legend II

Pentair LL505PMG Kreepy Krauly Platinum

 

The Pool'N Brush comes with a manufacturer LIFETIME warranty covering any manufacturing defects so rest assured you are investing in a product that will last a very long time. If your OEM foam tail scrubber brush is worn out or even missing, this would be a good time to invest in the Pool'N Brush. Over time you will save money as you will no longer need to invest in a new foam tail scrubber brushes every few months.

shop now.jpg
bottom of page